Classic Running In Oil 30
5 L Metal Tin
£33.95
Description:
Millers Oils Classic Running In Oil 30
A mineral based SAE 30 running in oil for vintage and classic engines designed for the initial running in of re-built engines. Use of this product optimises performance and fuel efficiency.
Use as received for initial running in of re-built engines. Formulated for running in on the road and can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine.
Note: Do not use high performance oils before the bedding-in process is complete.
Benefits:
High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in
Provides full protection to highly stressed valve gear/associated components whilst allowing piston rings to bed in against the bore
Suitable for 500 miles after which it should be replaced with the appropriate Millers Oils classic engine oil
Good running in will optimise the performance and fuel efficiency of a reconditioned engine
Specifications:
Designed to provide the performance of API SE/CC
Suitable for 500 miles road use
Very low leak down [4%] obtained after thorough running in process